| |
Kwik-Bridge Punch System is a unique patented design that incorporates a tab into the punch-out of the stud, resulting in a clean connection and reduced labor. The Kwik-Bridge Punch System eliminates extra components required in traditional bridging installation and can be used with regular cold roll channel or with Kwik-Stik. The cold roll channel is installed through the stud punch-outs perpendicular to the framing, at pre-determined spacing along the height of the wall. Once the channel is positioned horizontally within the wall cavity, a method of securing the channel to each individual stud will be selected according to the design criteria for the assembly. Typically, positive attachment is achieved through welding or by using angle clips and screws. The Kwik-Bridge Punch Systems serves as an alternative method of achieving positive attachment of the cold rolled channel to the steel stud. |
|
 |
| |
|
Features and Benefits
• Eliminates use of clip angles, bridging clips and welding
• No pre-determined stud layout required
• Faster installation saving up to 40% in combined labor
and material costs
• Bend tabs to 90º and attach cold roll channel |
|
Material Compostion
• ASTM A653/A653M
• 33, 43 Mil: Yield Strength: 33 ksi
• 54, 68 Mil: Yield Strength: 50 ksi
• 33, 43, 54 Mil: G-60 hot dipped galvanized coating
• 68 Mil: G-90 hot dipped galvanized coating
• Material Thickness = 33 mil (20 gauge, 0.0346” design thickness)
• Material Thickness = 43 mil (18 gauge, 0.0451” design thickness)
• Material Thickness = 54 mil (16 gauge, 0.0566” design thickness)
• Material Thickness = 68 mil (14 gauge, 0.0713” design thickness)
|